Study Guide for Albert Camuss The Fall

Study Guide for Albert Camus's The Fall Delivered by a sophisticated, outgoing, yet often suspicious narrator, Albert Camus’s The Fall employs a format that is rather uncommon in world literature. Like novels such as Dostoevsky’s Notes from Underground, Sartre’s Nausea, and Camus’s own The Stranger, The Fall is set up as a confession by a complicated main character- in this case, an exiled French lawyer named Jean-Baptiste Clamence. But The Fall- unlike these famous first-person writings- is actually a second-person novel. Clamence directs his confession at a single, well-defined listener, a â€Å"you† character who accompanies him (without ever speaking) for the duration of the novel. In the opening pages of The Fall, Clamence makes this listener’s acquaintance in a seedy Amsterdam bar known as Mexico City, which entertains â€Å"sailors of all nationalities† (4). Summary In the course of this initial meeting, Clamence playfully notes the similarities between him and his new companion: â€Å"You are my age in a way, with the sophisticated eye of a man in his forties who has seen everything, in a way; you are well dressed in a way, that is as people are in our country; and your hands are smooth. Hence a bourgeois, in a way! But a cultured bourgeois!† (8-9). However, there is much about Clamence’s identity that remains uncertain. He describes himself as â€Å"a judge-penitent,† yet doesn’t provide an immediate explanation of this uncommon role. And he omits key facts from his descriptions of the past: â€Å"A few years ago I was a lawyer in Paris and, indeed, a rather well-known lawyer. Of course, I didn’t tell you my real name† (17). As a lawyer, Clamence had defended poor clients with difficult cases, including criminals. His social life had been full of satisfactions- respect from his colleagues, affairs with many women- and his public behavior had been scrupulously courteous and polite. As Clamence sums up this earlier period: â€Å"Life, its creatures and its gifts, offered themselves to me, and I accepted such marks of homage with a kindly pride† (23). Eventually, this state of security began to break down, and Clamence traces his increasingly dark state of mind to a few specific life events. While in Paris, Clamence had an argument with â€Å"a spare little man wearing spectacles† and riding a motorcycle (51). This altercation with the motorcyclist alerted Clamence to the violent side of his own nature, while another experience- an encounter with a â€Å"slim young woman dressed in black† who committed suicide by throwing herself off a bridge- filled Clamence with a sense of â€Å"irresistible weakness (69-70). During an excursion to the Zuider Zee, Clamence describes the more advanced stages of his â€Å"fall.† At first, he began to feel intense turmoil and pangs of disgust with life, although â€Å"for some time, my life continued outwardly as if nothing had changed† (89). He then took turned to â€Å"alcohol and women† for comfort- yet only found temporary solace (103). Clamence expands upon his philosophy of life in the final chapter, which takes place in his own lodgings. Clamence recounts his disturbing experiences as a World War II prisoner of war, lists his objections to commonplace notions of law and freedom, and reveals the depth of his involvement in the Amsterdam underworld. (It turns out that Clamence keeps a famous stolen painting- The Just Judges by Jan van Eyck- in his apartment.) Clamence has resolved to accept life- and to accept his own fallen, immensely flawed nature- but has also resolved to share his troubling insights with anyone who will listen. In the final pages of The Fall, he reveals that his new profession of â€Å"judge-penitent† involves â€Å"indulging in public confession as often as possible† in order to acknowledge, judge, and do penance for his failings (139). Background and Contexts Camus’s Philosophy of Action: One of Camus’s greatest philosophical concerns is the possibility that life is meaningless- and the need (in spite of this possibility) for action and self-assertion. As Camus wrote in his tract The Myth of Sisyphus (1942), philosophical discourse â€Å"was previously a question of finding out whether or not life had to have a meaning to be lived. It now becomes clear on the contrary that it will be lived all the better if it has no meaning. Living an experience, a particular fate, is accepting it fully.† Camus then goes on to declare that â€Å"one of the only coherent philosophical positions is thus revolt. It is constant confrontation between man and his own obscurity.† Even though the Myth of Sisyphus is a classic of French Existentialist philosophy and a central text for understanding Camus, The Fall (which, after all, appeared in 1956) should not merely be taken as a fictional re-working of The Myth of Sisyphus. Clamence does revolt against his life as a Paris lawyer; however, he retreats from society and tries to find specific â€Å"meanings† in his actions in a manner that Camus might not have endorsed. Camus’s Background in Drama: According to literary critic Christine Margerrison, Clamence is a â€Å"self-proclaimed actor† and The Fall itself is Camus’s â€Å"greatest dramatic monologue.† At several points in his career, Camus worked simultaneously as a playwright and a novelist. (His plays Caligula and The Misunderstanding appeared in the mid 1940s- the same period that saw the publication of Camus’s novels The Stranger and The Plague. And in the 1950s, Camus both wrote The Fall and worked on theater adaptations of novels by Dostoevsky and William Faulkner.) However, Camus was not the only mid-century author who applied his talents to both theater and the novel. Camus’s Existentialist colleague Jean-Paul Sartre, for instance, is famous for his novel Nausea and for his plays The Flies and No Exit. Another of the greats of 20th century experimental literature- Irish author Samuel Beckett- created novels that read a little like â€Å"dramat ic monologues† (Molloy, Malone Dies, The Unnamable) as well as oddly-structured, character-driven plays (Waiting for Godot, Krapp’s Last Tape). Amsterdam, Travel, and Exile: Although Amsterdam is one of Europe’s centers of art and culture, the city takes on a rather sinister character in The Fall. Camus scholar David R. Ellison has found several references to disturbing episodes in Amsterdam’s history: first, The Fall reminds us that â€Å"the commerce linking Holland to the Indies included trade not just in spices, foodstuffs, and aromatic wood, but also in slaves; and second, the novel takes place after â€Å"the years of World War II in which the Jewish population of the city (and of the Netherlands as a whole) was subject to persecution, deportation, and ultimate death in Nazi prison camps.† Amsterdam has a dark history, and exile to Amsterdam allows Clamence to face his own unpleasant past. Camus declared in his essay â€Å"The Love of Life† that â€Å"what gives value to travel is fear. It breaks down a kind of inner dà ©cor in us. We can’t cheat any more- hide ourselves away behin d the hours in the office or at the plant.† By going into living abroad and breaking his earlier, soothing routines, Clamence is forced to contemplate his deeds and face his fears. Key Topics Violence and Imagination: Although there is not much open conflict or violent action directly displayed in The Fall, Clamence’s memories, imaginings, and turns of imagery add violence and viciousness to the novel. After an unpleasant scene during a traffic jam, for instance, Clamence imagines pursuing a rude motorcyclist, â€Å"overtaking him, jamming his machine against the curb, taking him aside, and giving him the licking he had fully deserved. With a few variations, I ran off this little film a hundred times in my imagination. But it was too late, and for several days I chewed a bitter resentment† (54). Violent and disturbing fantasies help Clamence to communicate his dissatisfaction with the life he leads. Late in the novel, he compares his feelings of hopeless and perpetual guilt to a special kind of torture: â€Å"I had to submit and admit my guilt. I had to live in the little-ease. To be sure, you are not familiar with that dungeon cell that was called the litt le-ease in the Middle Ages. In general, one was forgotten there for life. That cell was distinguished from others by ingenious dimensions. It was not high enough to stand up in nor yet wide enough to lie down in. One had to take an awkward manner and live on the diagonal† (109). Clamence’s Approach to Religion: Clamence does not define himself as a religious man. However, references to God and Christianity play a major part in Clamence’s manner of speaking- and help Clamence to explain his changes in attitude and outlook. During his years of virtue and altruism, Clamence took Christian kindliness to grotesque proportions: â€Å"A very Christian friend of mine admitted that one’s initial feeling on seeing a beggar approach one’s house is unpleasant. Well, with me it was worse: I used to exult† (21). Eventually, Clamence finds yet another use for religion that is admittedly awkward and inappropriate. During his fall, the lawyer made references â€Å"to God in my speeches before the court†- a tactic that â€Å"awakened mistrust in my clients† (107). But Clamence also uses the Bible to explain his insights about human guilt and suffering. For him, Sin is part of the human condition, and even Christ on the cross is a figure of guilt: â€Å"He knew he was not altogether innocent. If he did not bear the weight of the crime he was accused of, he had committed others- even though he didn’t know which ones† (112). Clamence’s Unreliability: At several points in The Fall, Clamence acknowledges that his words, actions, and apparent identity are of questionable validity. Camus’s narrator is very good at playing different, even dishonest roles. Describing his experiences with women, Clamence notes that â€Å"I played the game. I knew they didn’t like one to reveal one’s purpose too quickly. First, there had to be conversation, fond attentions, as they say. I wasn’t worried about speeches, being a lawyer, nor about glances, having been an amateur actor during my military service. I often changed parts, but it was always the same play† (60). And later in the novel, he asks a series of rhetorical questions- â€Å"Don’t lies eventually lead to the truth? And don’t all my stories, true or false, tend toward the same conclusion?†- before concluding that â€Å"authors of confessions write especially to avoid confessing, to tell nothing of wha t they know† (119-120). It would be wrong to assume that Clamence has given his listener nothing but lies and fabrications. Yet it is possible that he is freely mixing lies and truth to create a convincing â€Å"act†- that he strategically using a persona to obscure particular facts and feelings. A Few Discussion Questions Do you think that Camus and Clamence have similar political, philosophical, and religious beliefs? Are there any major differences- and if so, why do you think Camus decided to create a character whose views are so at odds with his own?In some important passages in The Fall, Clamence introduces violent images and intentionally shocking opinions. Why do you think Clamence is dwelling on such disconcerting topics? How is his willingness to make his listener uneasy tied to his role as a â€Å"judge-penitent?†Exactly how reliable is Clamence, in your opinion? Does he ever seem to exaggerate, to obscure the truth, or to introduce obvious falsehoods? Find a few passages where Clamence seems especially elusive or unreliable, and keep in mind that Clamence may become significantly more (or significantly less) reliable from passage to passage.Re-imagine The Fall told from a different perspective. Would Camus’s novel be more effective as a first-person account by Clamence, withou t a listener? As a straightforward, third-person description of Clamence’s life? Or is The Fall supremely effective in its present form? Note on Citations: All page numbers refer to Justin OBriens translation of The Fall (Vintage International, 1991).

How to Say And in Mandarin

How to Say And in Mandarin Some English words have several possible Mandarin Chinese translations. Knowing when to use the correct word is one of the main challenges for both beginner-level Mandarin students and professional translators alike. For example, the English word for can has at least three possible Mandarin translations: èÆ' ½ (nà ©ng), Ã¥  ¯Ã¤ » ¥ (kÄ› yÇ ), and ä ¼Å¡ (huà ¬). Another English word with multiple translations is â€Å"and.† You may think that there can be no possible variations for and, but there are many different meanings for this word. It depends on the subtle nuances of the speaker or writers meaning or the context in which this conjunction is used. Joining Nouns In sentences that combine nouns or noun phrases, there are three ways to say and. All three of these connectors are interchangeable and commonly used. They are: Hà ©Ã¢    : å’Å'Hn⠁   : å’Å'GÄ“n⠁   : è ·Å¸ Note that hà © and hn use the same character. The hn pronunciation is most commonly heard in Taiwan. The example sentences are given first in English, followed by a transliteration in Chinese called  pinyin,  a Romanization system used to help beginners learn Mandarin. Pinyan  transcribes the sounds of Mandarin using the Roman  alphabet. Pinyin is most commonly used in Mainland China for teaching school children to read and it is also widely used in teaching materials designed for Westerners who wish to learn Mandarin.  The sentences are then listed in Chinese characters in traditional and simplified forms where appropriate. He and I are colleagues.WÇ’ hn tÄ  shà ¬ tà ³ngshà ¬.我å’Å'ä »â€"æ˜ ¯Ã¥ Å'ä ºâ€¹ Both pineapple and mango are good to eat.Fà ¨nglà ­ hà © mngguÇ’ dÃ… u hÄ›n hÇŽo chÄ «.(traditional form) é ³ ³Ã¦ ¢ ¨Ã¥â€™Å'芒æžÅ"éÆ' ½Ã¥ ¾Ë†Ã¥ ¥ ½Ã¥ Æ'(simplified form) å‡ ¤Ã¦ ¢ ¨Ã¥â€™Å'芒æžÅ"éÆ' ½Ã¥ ¾Ë†Ã¥ ¥ ½Ã¥ Æ' She and mom went for a walk.TÄ  gÄ“n mÄ ma qà ¹ gung jiÄ“.Ã¥ ¥ ¹Ã¨ ·Å¸Ã¥ ª ½Ã¥ ª ½Ã¥Å½ »Ã©â‚¬â€ºÃ¨ ¡â€"Ã¥ ¥ ¹Ã¨ ·Å¸Ã¥ ¦Ë†Ã¥ ¦Ë†Ã¥Å½ »Ã©â‚¬â€ºÃ¨ ¡â€" This pair of shoes and that pair of shoes are the same price.Zhà ¨ shuÄ ng xià © gÄ“n n shuÄ ng xià © jiqian yà ­yng.這雙鞋è ·Å¸Ã©â€š £Ã©â€ºâ„¢Ã©Å¾â€¹Ã¥Æ' ¹Ã©Å' ¢Ã¤ ¸â‚¬Ã¦ ¨ £Ã¨ ¿â„¢Ã¥ Å'éž‹è ·Å¸Ã©â€š £Ã¥ Å'éž‹ä » ·Ã©â€™ ±Ã¤ ¸â‚¬Ã¦   · Joining Verbs The Mandarin Chinese character ä ¹Å¸ (yÄ›) is used to join verbs or verb phrases. It translates as either â€Å"and† or â€Å"also.† I like to watch movies and listen to music.WÇ’ xÇ huan kn dinyÇ ng yÄ› xÇ huan tÄ «ng yÄ «nyuà ¨.我åâ€"Å"æ ­ ¡Ã§Å"‹é› »Ã¥ ½ ±Ã¤ ¹Å¸Ã¥â€"Å"æ ­ ¡Ã¨  ½Ã©Å¸ ³Ã¦ ¨â€šÃ¦Ë†â€˜Ã¥â€"Å"æ ¬ ¢Ã§Å"‹ç” µÃ¥ ½ ±Ã¤ ¹Å¸Ã¥â€"Å"æ ¬ ¢Ã¥  ¬Ã©Å¸ ³Ã¤ ¹  He doesn’t like to go for walks and he doesn’t like to exercise.TÄ  bà ¹ xÇ huan gung jiÄ“ yÄ› bà ¹ xÇ huan yà ¹ndà ²ng.ä »â€"ä ¸ Ã¥â€"Å"æ ­ ¡Ã©â‚¬â€ºÃ¨ ¡â€"ä ¹Å¸Ã¤ ¸ Ã¥â€"Å"æ ­ ¡Ã© â€¹Ã¥â€¹â€¢Ã¤ »â€"ä ¸ Ã¥â€"Å"æ ¬ ¢Ã©â‚¬â€ºÃ¨ ¡â€"ä ¹Å¸Ã¤ ¸ Ã¥â€"Å"æ ¬ ¢Ã¨ ¿ Ã¥Å  ¨ Other Transition Words There are a few Mandarin Chinese words that can be translated as â€Å"and,† but which more accurately mean â€Å"furthermore, â€Å"moreover,† or other such transition words. These words are sometimes used to show a cause-and-effect relationship between the two phrases. Chinese transition words include: Ér qiÄ› - è€Å'ä ¸â€: additionally  Bà ¬ng qiÄ› - ä ¸ ¦Ã¤ ¸â€ (traditional) / Ã¥ ¹ ¶Ã¤ ¸â€ (simplified): and; moreoverRn hà ²u - ç„ ¶Ã¥ ¾Å' / ç„ ¶Ã¥ Å½: and thenYÇ  hà ²u - ä » ¥Ã¥ ¾Å' / ä » ¥Ã¥ Å½: and afterHi yÇ’u -  Ã©â€šâ€žÃ¦Å"‰ / è ¿ËœÃ¦Å"‰: even more; on top of thatCÇ  wi -  Ã¦ ­ ¤Ã¥ ¤â€": furthermore Ér qiÄ› è€Å'ä ¸â€ additionally Bà ¬ng qiÄ› ä ¸ ¦Ã¤ ¸â€ (traditional)Ã¥ ¹ ¶Ã¤ ¸â€ (simplified) andmoreover Rn hà ²u ç„ ¶Ã¥ ¾Å'ç„ ¶Ã¥ Å½ and then YÇ  hà ²u ä » ¥Ã¥ ¾Å'ä » ¥Ã¥ Å½ and after Hi yÇ’u é‚„æÅ"‰è ¿ËœÃ¦Å"‰ even moreon top of that CÇ  wi æ ­ ¤Ã¥ ¤â€" furthermore Sentence Examples of Transition Words As noted, the particular form of and that you use in Mandarin Chinese depends heavily on the context and meaning of the word. It can be helpful, therefore, to peruse some example sentences to see how the different forms of and are used in various contexts. This is a very good movie and (moreover) the music is very nice.Zhà ¨ bà ¹ dinyÇ ng hÄ›nhÇŽokn à ©rqiÄ› yÄ «nyuà ¨ hÄ›nhÇŽo tÄ «ng.這éÆ' ¨Ã©â€º »Ã¥ ½ ±Ã¥ ¾Ë†Ã¥ ¥ ½Ã§Å"‹è€Å'ä ¸â€Ã©Å¸ ³Ã¦ ¨â€šÃ¥ ¾Ë†Ã¥ ¥ ½Ã¨  ½Ã¨ ¿â„¢Ã©Æ' ¨Ã§â€ µÃ¥ ½ ±Ã¥ ¾Ë†Ã¥ ¥ ½Ã§Å"‹è€Å'ä ¸â€Ã©Å¸ ³Ã¤ ¹ Ã¥ ¾Ë†Ã¥ ¥ ½Ã¥  ¬ This knapsack is very practical and (furthermore) the price is reasonable.Zhà ¨gà ¨ fngshuÇ  bÄ“ibÄ o hÄ›n shà ­yà ²ng bà ¬ngqiÄ› jigà © hà ©lÇ .這個é˜ ²Ã¦ ° ´Ã¨Æ'Å'Ã¥Å'…å ¾Ë†Ã¥ ¯ ¦Ã§â€ ¨Ã¤ ¸ ¦Ã¤ ¸â€Ã¥Æ' ¹Ã¦   ¼Ã¥ Ë†Ã§ â€ Ã¨ ¿â„¢Ã¤ ¸ ªÃ©Ëœ ²Ã¦ ° ´Ã¨Æ'Å'Ã¥Å'…å ¾Ë†Ã¥ ®Å¾Ã§â€ ¨Ã¥ ¹ ¶Ã¤ ¸â€Ã¤ » ·Ã¦   ¼Ã¥ Ë†Ã§ â€  We can first go have dinner and then see a movie.WÇ’men xiÄ n qà ¹ chÄ « wÇŽncÄ n rnhà ²u zi qà ¹ kn dinyÇ ng.我們先åŽ »Ã¥ Æ'晚é ¤ Ã§â€ž ¶Ã¥ ¾Å'å† Ã¥Å½ »Ã§Å"‹é› »Ã¥ ½ ±Ã¦Ë†â€˜Ã¤ » ¬Ã¥â€¦Ë†Ã¥Å½ »Ã¥ Æ'晚é ¤ Ã§â€ž ¶Ã¥ Å½Ã¥â€  Ã¥Å½ »Ã§Å"‹ç” µÃ¥ ½ ± Eat dinner, and then you can eat dessert.ChÄ « wn wÇŽncÄ n yÇ hà ²u jià ¹ nà ©ng chÄ « tin diÇŽn.Ã¥ Æ'Ã¥ ®Å'晚é ¤ Ã¤ » ¥Ã¥ ¾Å'Ã¥ ° ±Ã¨Æ' ½Ã¥ Æ'ç”Å"é »Å¾Ã£â‚¬â€šÃ¥ Æ'Ã¥ ®Å'晚é ¤ Ã¤ » ¥Ã¥ Å½Ã¥ ° ±Ã¨Æ' ½Ã¥ Æ'ç”Å"ç‚ ¹Ã£â‚¬â€š Im cold because I didnt wear enough clothes, and on top of that its snowing now.WÇ’ lÄ›ng yÄ «nwà ¨i wÇ’ chuÄ n bà ¹gà ²u yÄ «fà º, hi yÇ’u xinzi xi xuÄ›le.我å† ·Ã¥â€º  Ã§â€š ºÃ¦Ë†â€˜Ã§ © ¿Ã¤ ¸ Ã¥ ¤  Ã¨ ¡ £Ã¦Å" Ã©â€šâ€žÃ¦Å"‰ç  ¾Ã¥Å" ¨Ã¤ ¸â€¹Ã©â€º ªÃ¤ ºâ€ Ã£â‚¬â€šÃ¦Ë†â€˜Ã¥â€  ·Ã¥â€º  Ã¤ ¸ ºÃ¦Ë†â€˜Ã§ © ¿Ã¤ ¸ Ã¥ ¤Å¸Ã¨ ¡ £Ã¦Å" Ã¨ ¿ËœÃ¦Å"‰çŽ °Ã¥Å" ¨Ã¤ ¸â€¹Ã©â€º ªÃ¤ ºâ€ Ã£â‚¬â€š Lets quickly go see the cherry blossoms. The weather is nice today, furthermore it will rain tomorrow.WÇ’men kui qà ¹ kn yÄ «nghuÄ . TiÄ nqà ¬ hÄ›n hÇŽo, cÇ wi mà ­ngtiÄ n huà ¬ xi yÇ”.我們å ¿ «Ã¥Å½ »Ã§Å"‹æ « »Ã¨Å  ±Ã£â‚¬â€šÃ¥ ¤ ©Ã¦ ° £Ã¥ ¾Ë†Ã¥ ¥ ½Ã¦ ­ ¤Ã¥ ¤â€"明å ¤ ©Ã¦Å"Æ'ä ¸â€¹Ã©â€º ¨Ã£â‚¬â€šÃ¦Ë†â€˜Ã¤ » ¬Ã¥ ¿ «Ã¥Å½ »Ã§Å"‹æ ¨ ±Ã¨Å  ±Ã£â‚¬â€š Ã¥ ¤ ©Ã¦ °â€Ã¥ ¾Ë†Ã¥ ¥ ½Ã¦ ­ ¤Ã¥ ¤â€"明å ¤ ©Ã¤ ¼Å¡Ã¤ ¸â€¹Ã©â€º ¨Ã£â‚¬â€š

Planning and carrying out a literacy activity to meet the learning Essay

Planning and carrying out a literacy activity to meet the learning goals - Essay Example Ideas in practice have been considered in a variety of genres to affect children writing skills. Children possess a number of attributes that enable them to be effective in writing. Such attributes include developing consistent spelling skills, recognition, and awareness in phonologies and phonemes, ability to form alphabetical letters comfortably, develop the writing concept, having a vocabulary in a wide range, and achieving oneself expression through writing. Writing flourishes in an environment with celebrated examples and displays for children writing on their own. The opportunities and purpose for writing are linked to the curriculum activities. Repeated writing and use of writing materials demonstrate what the children are doing in a classroom. It is important that pupils are trained to elaborate sentences from a tender age. One plans a snowman activity by first selecting the theme. Here, alphabetical letters are selected to represent a given word. For example, we can consider letter S for snow or snowflake.   Define the keywords to a student. Snow is a precipitate from such as sleet, hail or rain that drops from clouds. A snowflake is ice crystals collectively formed in and beneath a cloud during rainfall. Alphabet S is printed and displayed on materials chosen. In this context, I will encourage each of the four boys and two girls to identify the letter on the display. Due to multilingual and monolingual children in my class, I will ensure reading is sound and repetitive.     ... For example, we can consider letter S for snow or snowflake. Secondly we analyze activities and instructions. Define the key words to student. Snow is a precipitate form such as sleet, hail or rain that drops from clouds. A snowflake is ice crystals collectively formed in and beneath a cloud during rainfall. Alphabet S is printed and displayed on materials chosen. In this context, I will encourage each of the four boys and two girls to identify the letter on the display. Due to multilingual and monolingual children in my class, I will ensure reading is sound and repetitive. They will trace alphabets in both lower and upper case by using fingers. Demonstrate to children on how to trace the letter by emphasizing the use of continuous stroke through finger and pencil tracing. Children are to color the images with a range of materials. To reinforce the letter practice, use a mini book and activity page to identify the related words. Ask children to also give other words with the same sou nd as you write them on the board. Displays of the alphabet posts and coloring images can also be used. Lastly, materials for the activity are chosen these materials are to meet all the needs of the four boys and two girls. They include; color poster, coloring page, handwriting worksheet, control charts, writing paper, printable lined paper, and theme coloring pages. Letters on the sand paper is also required to enable a child who requires the sense of touch to identify the alphabets. Broad display working sheet will be provided to the deaf child. In conjunction with working sheets of the American Sign Language, the deaf child will be able to identify the alphabets. In addition, the blind will require audio devices for

How Service Providers Ensure Consumer Retention Essay

How Service Providers Ensure Consumer Retention - Essay Example This is because it is only through customer retention that these service providers can gain a competitive advantage over other firms in the same industry. Nevertheless, the question is, how does these service providers ensure this? The purpose of this paper is to explore the strategies employed by service providers to ensure customer retention. One key element of customer retention is ensuring that customers are provided with quality goods and services (Buttle 12). It is noted that many service providers tend to strive towards the provision of quality good and services as a way of keeping their customers loyal to the company. This is because no single customer would be willing to come back to get the products or services of a company that they had previous been dissatisfied. Buttle notes that many customers would only be willing to remain loyal to those companies that provide quality products and services to their customers (14). This is one of the reasons as to why companies such as Walmart, Target and Kroger among others have large customer retention base. These retail shops attribute its customer loyalty to the fact that it provides better quality products and services, which has kept their customers coming again and again. Research shows that customer retention is not only based on provision of better quality products and services, but also on creating awareness on the existence of the products and services (Hennig-Thurau and Hansen 102). Many service providers are aware of this fact, and as a result engage on extensive advertising campaign to inform their customers of the existence of their products and services, as is the case with Walmart one of the largest grocery retail shop in the US. Walmart, for instance, does this through mailing list, local advertising, video marketing, email list and facebook among others. Customer retention is also very much dependent on customer service (Lamb 44). As a result, to ensure that customers remain loyal to the compan y, service providers always ensure that customers are provided with optimal customer service. This involves extending a helping hand to the customers all the time irrespective of the place and time. Technological advancement have made this easier to service provider as they can now do this through social media networks to keep in close contact with their customers as is the case with Target retail. This ensures that customer’s queries and problems are handled in time making them feel valued, thus building loyalty. In addition, many service providers ensure that those employed at the customer care desks are professional with etiquette, hospitable and able to handle their customers well. This is because these are the people who mainly come into close contact with customers first. They, therefore, their first impression with the customers can impact greatly on whether the customer will remain loyal or not. Take for example a situation where a customer makes an important call to the company and it is not picked by the customer care employee in time. Such behaviors makes customer feel less valued by the company and as such will seek the services of competitors who can handle them well. Making a customer feel special and valued is another factor that contributes immensely to customer loyalty. Many at time, customers prefer being valued and treated in a special way for them to remain loyal.

Cellular and Mobile Communications Technology

Cellular and Mobile Communications Technology LUCAS A. EPPARD HISTORY OF GSM At the 1982 Conference of European Post and Telecommunications (CEPT), the standardization body, Groupe Speciale Mobile, was created to start work on a single European standard. The name of this standard was later changed to Global System for Mobile Communications (GSM). GSM is a wide area wireless communications system that uses digital radio transmission to provide voice, data, and multimedia communication services.[1] A GSM system manages the communication between mobile telephones, radio towers, and interconnecting switching systems. The development of the GSM specification began later that year, with the first commercial GSM system later being deployed in 1991. By 2004, there were over a billion GSM subscribers in more than 205 countries and territories across the globe.[2] Before the GSM system was implemented, most countries used cellular systems that were often in conflict with each other. Most mobile telephones could only function on their specific cellular network, and as a result many customers could not travel to neighboring countries and still expect service. With various types of systems only serving exclusive groups of people, the large-scale production necessary to manufacture low-cost subscriber equipment was not practical. This resulted in high equipment costs and systems were not very successful in the open market. In 1990, the first phase of GSM specifications was finalized. This included basic voice and data services.[3] Around the same time, the initial efforts were made to modify the GSM specification to offer service at the 1800 MHz frequency range. DCS 1800, which the standard is now known as, is used for the Personal Communications Network (PCN).[4] Since that time, Phase 2 of the GSM and DCS 1800 specifications has been completed. In this phase, enhanced data transfer capabilities and advanced short messages services were added. [5] GSM RADIO â€Å"GSM radio is a wireless communication system that divides geographic areas into small radio areas (cells) that are interconnected with each other.†[6] Each of the coverage areas has one or more transmitters and receivers that converse with cellular handsets in its designated area. GSM radio systems function in a particular frequency band or bands that have been assigned to the system. Depending on the frequency plan, system administrators may choose to recycle specific radio channels at different cell sites. Through a combination of either TDMA or FDMA, subscribers share each radio channel. A GSM radio channel is 200 kHz wide and is further divided into frames that are made up of eight time slots. Each cell site may contain several channels which are shared by as many as 8 to 16 voice users per radio channel. TDMA Time division multiple access (TDMA) is a method of sharing one radio channel through the division of time slots which are then subsequently allocated among multiple users of that radio channel.[7] A mobile radio is assigned a particular time and position on a channel when it communicates with a TDMA system. Through this process, it is possible for a TDMA system to allow multiple users to operate on a single radio channel through the use of separate time slots. TDMA systems therefore amplify their capacity to serve several users with a limited number of radio channels. GSM employs time division multiplexing (TDM) to distribute one modulated carrier frequency radio waveform between 16 half rate or 8 full rate phone calls.[8] Because of this, a clear distinction is often made between a communication channel and a radio carrier in many publications pertaining to GSM. DUPLEX CHANNELS Duplex communication is the transmission of voice and/or data signals that allows simultaneous 2-way communication.[9] In order for duplex communication to occur on analog systems, a separate voice path must be assigned to both a transmitter and frequency. This method of using two frequencies for duplex communication is called frequency division duplex (FDD).[10] Time division duplex (TDD) is another technique that can be used for duplex communication. Time sharing allows two devices to achieve two way communications through TDD. Similar to how a walkie-talkie works; one device transmits while another receives. Once the original transmission is complete, the second device becomes the transmitter while the first becomes the receiver. This process then constantly repeats itself so that the data seems to flow in both directions instantaneously. The GSM system utilizes both FDD and TDD communication. One frequency is used while the handset communicates with the cell tower, while the reverse communication from the tower to the handset uses the other frequency.[11] However, TDD is also used in the GSM system while the transmitter and receiver talk at different times. This time offset between the transmission and reception also helps to streamline the design of the handset. The radio frequency separation between the forward (downlink) and reverse (uplink) frequencies differs between the frequency bands. As a general rule, the separation must be greater between the forward and reverse channels at the higher frequencies. For instance, the frequency separation in the GSM 900MHz system is 45 MHz while the separation is 95 MHz for PCN. Finally, the GSM PCS 1900 MHz system has a frequency separation of 80 MHz.[12] VOICE SERVICES Voice service is a form of communication service in which multiple users can transmit information over the voice frequency band via a communication network.[13] Voice service consists of the initiation of sessions between at least two users which allows for the real time, or near real time, transmission of voice signals between those users. A GSM network delivers numerous types of digital voice services. A number of factors can affect the quality of voice service on a GSM system. However, through the use of several distinct forms of speech compression a GSM system can dynamically adjust the voice quality.[14] Each service provider has the ability to choose and manage which speed compression process (voice coding) their network utilizes. Service providers can increase the amount of users that they provide service to through the use of voice coders that possess higher speech compression rates. However, this comes at the cost of delivering a more degraded signal to each user. Besides ba sic voice services, the GSM system can also provide both group and broadcast voice services. DATA SERVICES A data service is a communication service that transmits information between two or more devices. By means of a communication network, data services can be delivered either inside or outside of the audio frequency band. Data service consists of the creation of physical and logical communication sessions between two or more users. This allows for the non-real time or near-real time transfer of data type signals between users.[15] However, a data modem has to be used in the event that a signal is broadcast on a non-digital channel. The data modem is needed to translate the signal into tones that can be sent in the audio frequency band. GSM voice traffic channels cannot send or receive analog modem data because the speech coder utilized by the system is only capable of compressing voice signals.[16] Medium speed packet data and low-speed circuit switched data are the two services provided in a GSM system. Circuit switched data is a communication process that maintains a committed communications path between two devices.[17] This can be accomplished no matter the amount of data being sent between the devices. This provides sole use of the circuit to the communications equipment employing it regardless of whether or not the circuit is idle. In order to create a circuit-switched data connection, the address must be sent before a connection path is established. Once this occurs, data is continually transmitted usin g this path until it is disconnected by request from either the sender or receiver.[18] Packet switched data service is the other utilized by a GSM system. Through the division of data into small packets, information can be transferred between two points. In order to reconstruct the original data, the packets are routed through the network and recombined at the receiving end. This can be achieved because the destination address is contained within each individual packet. So no matter which route the packets take through the network they will end up at the same destination. The GSM system uses general packet radio service (GPRS) to provide its packet data service. In using the GPRS system, new gateways and packet control channels are added to a GSM system. It is important to note that GPRS is a type of packet-switched data service that is known as â€Å"always-on.† This means that when a device is turned on it acquires an IP address that it needs in order to communicate with the network.[19] CDMA Code Division Multiple Access (CDMA) is a digital cellular radio system currently in use in more than 35 countries around the world.[20] It is a form of spread spectrum communications in which a radio signal is transmitted over a dedicated channel as a much wider signal than is traditionally necessary. By using a signal with a wider than normal bandwidth, interference from other users on the same section of bandwidth is minimized. This permits several users to share the radio channel at the same time. Come in two basic forms: frequency hopping and code division.[21] Frequency hopping multiple access (FHMA) is an access technology in which mobile radios or cellular handsets share radio channels by breaking their transmissions down into short bursts over a number of frequencies. A device transmits for a short period of time on one frequency, and then hops to another radio frequency to continue its transmission. CDMA allows a number of users to share a single radio channel frequency simultaneously by designating a unique code sequence to each mobile radio. By assigning a particular hop pattern to each mobile device collisions can be minimized. Even if collisions do occur randomly only a small amount of data may be lost. Furthermore, error detection and correction methods can be implemented in order to fix the data that was lost.[22] Compared to previous narrowband wireless systems, CDMA technology is a wideband spread spectrum system. It is important to note that the features, services and requirements for CDMA were developed by standards organizations using many pre-existing technologies. For this reason, CDMA is considered a second generation (2G) cellular system. HISTORY OF CDMA The growth of CDMA technology began in the United States in 1989 as a result of the CTIA next cellular generation technology requirements.[23] In September of the previous year the Cellular Telecommunications Industry Association (CTIA) presented the User Performance Requirements (UPR) for the next generation of wireless service. In 1989 the Telecommunications Industry Association (TIA) designated TDMA as the radio interface standard. Later that year QUALCOMM was able to build a CDMA system that met the CTIA requirements. This was achieved largely through the support of mobile telephone manufacturers and carriers, as well as new infrastructure equipment.[24] QUALCOMM and its associates presented the results of their field trials at the end of 1991. This pushed the CTIA Board of Directors to implement a resolution which requested TIA to structurally organize new developments from wideband systems. By mid-1993 TIA had voted on and accepted IS-95 as the CDMA air interface standard radio specifications. The systems which were based on the IS-95 standard became known as cdmaOne systems.[25] In 1995 the first commercial CDMA network was implemented in Hong Kong. CDMA RADIO CDMA is the fasted growing technology in wireless communications. A CDMA network consists of the same basic components as other wireless systems. This includes a mobile station, base station, a controller, and finally a switching network. In CDMA, a carrier frequency is separated into 64 individual channels through the use of codes. Each channel transmits the data associated with a separate and unique conversation in digitally coded form.[26] In some cases an independently coded channel transmits signals related to the start of a connection. In spread spectrum systems like CDMA, one carrier holds multiple channels. This can sometimes lead to confusion when discussing CDMA with someone who is familiar with the older analog frequency division multiplex (FDM) systems. With older FDM systems a channel is synonymous with a carrier. Therefore each pair of carrier frequencies was able to carry only one conversation.[27] All CDMA networks use a specific radio frequency band for signals from the base transmitter to the mobile receiver and a second distinct radio frequency band for the signals from the mobile transmitter to the base receiver.[28] CDMA technology can be used in either the existing 800 MHz cellular frequency band or the 1900 MHz personal communications service (PCS) band. CDMA has the ability to function in the same radio spectrum allocation as older cellular systems when it is being used on those networks. The mobile station transmit frequency band is between 824-849 MHz, while the base station transmit frequency ranges from 869-894 MHz.[29] When in use in the 800 MHz band, CDMA maintains a 45 MHz separation between the forward and reverse channels. Some radio carrier frequencies are defined for CDMA use in its cellular network. However, not all of these frequencies are used for CDMA transmission. This is because the FCC requires that analog radio transmission (AMPS) continue to operate . CDMA operation is also compliant with the frequency structure of the PCS band. The separation of the forward and reverse channels is 80 MHz while operating on this band. The mobile station transmit frequency band is between 1850-1909 MHz; while the base station transmit frequency band ranges from 1930-1989 MHz.[30] Some CDMA systems operate in the Personal Communications System (PCS) frequency bands. PCS is mostly found in North America on the 1900 MHz frequency band, where it is known as PCS-1900. Due to the commonality of the base band signals, some manufacturers make dual band CDMA handsets that are capable of operating on both the 800 MHz and 1900 MHz bands.[31] If a subscriber’s handset is manufactured to allow dual frequency band operation it is possible to obtain service on either or both systems. However, this can only be achieved if the CDMA networks in the region are properly linked. As CDMA moved further towards a third generation technology, the CDMA2000 arose as t he next level of the IS-95 standard. 3G TECHNOLOGIES The term first generation system (1G) is most commonly used in regards to older analog cellular systems. These analog systems eventually gave way to the newer digital second generation systems (2G) that are popular today. 2G systems in use today include the GSM and cdmaOne systems previously mentioned in this paper as well as the US-TDMA and PDC systems.[32] These systems allowed voice communications to go wireless in most of the industrialized world and have drastically increased mobile handset functions. Subscribers have come to expect their cellular networks to provide them with text messaging and data access capabilities. In the United States it is almost unheard of now for a network provider to not offer data services in excess of 500 MB if not at least 1GB per month. The abundance of 2G technologies spurred the demand for even greater services. At the 1992 World Administrative Radio Conference (WARC) of the ITU (International Telecommunications Union), member nation delegates began to investigate the frequencies that would be available for future expansion of 3G systems.[33] The International Mobile Telecommunications System 2000 (IMT-2000) was created as a result of this meeting. It is important to note that IMT-2000 is often used interchangeably with Universal Mobile Telecommunications System (UMTS). UMTS defined a wireless communication system that operates in the 2GHz frequency band.[34] The primary objective of IMT-2000 standard was the development of a single universal air interface that was built upon pre-existing infrastructure. This would help to keep start-up costs low and potentially allow international roaming. The Third Generation Partnership Program (3GPP) was created to coordinate this process. It became evident early on that a single air interface would be nearly impossible to attain so a second committee was formed to oversee the process of bringing other air interfaces up to the IMT-2000 standard. A second partnership program was established to ensure this would occur and the 3GPP2 was born. The two partnership programs are essentially drawn along the fault lines of GSM and CDMA. UMTS, which is often used synonymously with Wideband CDMA or WCDMA, has become the standard for GSM 3G technologies and falls under the umbrella of 3GPP1. The 3GPP2 on the other hand focuses on the CDMA2000 standard.[35] BIBLIOGRAPHY Arokiamary, V. J. (2009). Cellular and Mobile Communications. Pune, India: Technical Publications Pune. Balston. D.M. and Macario, R.V. (1993). Cellular Radio Systems. Norwood, Massachusetts: Artech House. Gibson, J. (ed) (1999). The Mobile Communications Handbook, 2nd ed. Dallas, Texas: CRC Press LLC. Haddon, L. and Green N. (2009). Mobile Communications: An Introduction to New Media. New York: Berg. Harte, L. et.al. (1999). CDMA IS-95 for Cellular and PCS : Technology, Economics and Services. New York: McRaw-Hill. Holma, Harri, and Antti Toskala (eds). (2002) WCDMA for UMTS: Radio Access for Third Generation Mobile Communications, 2nd ed. John Wiley Sons. Holtzman, J. M. and Zorzi, M. (2002). Advances in Wireless Communications. New York: Kluwer Academic Publishers. Lee, W. C. Y. (2006) Wireless and Cellular Telecommunications, 3rd ed. New York: McGraw Hill Professional. Mouly, M. and Pautet, M. (1992). The GSM System for Mobile Communications. Palaiseau, France: Telecom Publishing . Poole, I. (2006). Cellular Communications Explained: From Basics to 3G. Oxford: Elsevier Ltd. Shing-Fong Su. (2007). The UMTS Air-Interface in RF Engineering: Design and Operation of UMTS Networks. New York: McGraw-Hill Professional.

Banana candle wax Essay

Abstract The researcher conducts this study due to economic crisis nowadays. Its aim is to create a product of floor wax which is cheaper and could give the same quality which the commercial one could give. In this modern age, floor polishes were made from synthetic materials. We decided to put back the floor polish of the old days that was made from natural materials. We choose banana peelings as component of the polish. But first, we must find out if the product was an effective as commercial polish and if it can be used for different surfaces so the researcher conducted an experiment. We scraped the inner portion of banana peelings and boiled for four hours, extracted the and blended to obtain a smooth gel. We therefore concluded that the Floor Polish Made from Banana peelings was effective as commercial polishes. The product did not contain harmful chemicals so it was environmental friendly, safer and cheaper. This step was made by the researcher to make a floor wax out of banana peel: first, we mix 2 candle wax then it was melted in a low fire. While still hot, add 1 teaspoon of oil. After mixing, add the banana peels, Stir it and leave it after 3min.then strain and pour in a container. Introduction and its background As of now, our country is facing a great crisis in economy. The researcher found out that in school, they required using of floor wax (commercial) to prevent the floor shiny. Even in the houses, floor wax is being use. So, the researcher decided to make a floor wax which is very affordable and can give an equal quality as the commercial can. Statement of the problem a)Can banana be an alternative source in making a floor wax? Formulation of the Hypothesis a) Banana can’t be an alternative source in making a floor wax. b)Banana can be an alternative source in making a floor wax. Significant of the study This study can give benefits to the people especially to the poor once, to have a good business and also to save money for their other needs. Especially in schools, it will give a benefit to the students as well as their parents to save money. It is also easy and enjoyable to do. Scope and limitation This study is only limited for the investigation of banana (Musa paradisiaca) used as alternative source for floor wax making. The researcher chose this study for further investigation if the banana can be an effective source for floor wax. 8.) Definition of terms a) Banana – a tropical fruit b) Floor wax – a substance used for shining floors. 9. Related Studies BANANA is the common name for a fruit and also the herbaceous plants of the genus Musa which produce the commonly eaten fruit. They are native to the tropical region of Southeast Asia and Australia. Today, they are cultivated throughout the tropics. Banana plants are of the family Musaceae. They are cultivated primarily for their fruit, and to a lesser extent for the production of fibre and as ornamental plants. As the bananas are mainly tall, upright, and fairly sturdy, they are often mistaken for trees, when the truth is the main or upright stem is called a pseudostem, literally meaning â€Å"fake stem†, which for some species can obtain a height of up to 2–8 m, with leaves of up to 3.5 m in length. Each pseudostem would produce a bunch of yellow, green, or even red bananas before dying and being replaced by another pseudostem. Banana leaves are widely used as plates and for lining cooking pits and for wrapping food for cooking or storage. A section of leaf often serves as an eye-shade. In Latin America, it is a common practice during rains to hold a banana leaf by the petiole, upside-down, over one’s back as an â€Å"umbrella† or â€Å"raincoat†. The leaves of the ‘Fehi’  banana are used for thatching, packing, and cigarette wrappers. 10.) Materials †¢Banana peelings †¢Wax Crystals †¢Technical Dye (if desire) †¢ Container †¢Kerosene 11.) Procedure 1.)candle wax. 2.) Melt the materials in a low fire. 3.) While still hot add technical dye (desired color). Stir the mixture. 4.) Add small amount of oil. 5.) Add the Banana peel. 6.) Pour in a desired mold or container and allow it to harden. 12.) Presentation of data analysis & interpretation 13.) Results As the researcher conduct this study, the researcher found out the following: SUBJECT # BANANA FLOOR WAX COMMERCIAL 1 Shine more shine 2 more shine shine 3 Shine more shine Based on the ff. data, the researcher made a better study related to this project and found out that banana floor wax could give also almost the same quality which the commercial one could give. 14.) Summary Floor waxing is essential to maintain the shiny gloss of wooden floors. However, if you find buying ready-made floor wax prohibitively expensive, it’s possible to mix candle wax and oil with banana peels to create a substance suitable for use polishing your wooden floors. This home-made floor wax will give a comparable shine and smoothness to that of commercial  products, and the oil counteracts the banana peels stickiness to ensure the finished sheen isn’t tacky. 15.) Conclusions Therefore we conclude that the banana Floor wax is attractive, effective and easy to do. The researcher therefore concluded that banana floor wax could be used as an alternative source of commercial one. 16.) Recommendation The researcher would highly recommend that we could use banana floor wax instead of busy commercial floor wax in the market because it’s cheaper and fits in our budget.

Operations Management at McDonalds - 2472 Words

Operations Management at McDonalds: McDonalds Corporation is renowned across the globe as the leading and largest chain of fast-food restaurants. Since its inception in the 1940s by siblings Mac and Dick McDonald, the firm has continued to grow and develop to its current state. The corporation has adopted a number of operations that are linked to its overall strategy in all its restaurants across the globe. One of the major factors that have contributed to its success in the global fast foods industry is quality management. McDonalds employs computerized information systems and stringent corporate quality standards to maintain quality across all its restaurants. The overall goal of the firm is to make its customers happy, which helps the firm to promote and maintain its viability in the increasingly competitive market. The corporations entire business processes and operations management basically revolve around its overall goal of making customers happy. History and Background of McDonalds: As previously mentioned, McDonalds Corporation has a long history that stretches back to the 1940s when it was founded by the McDonald brothers. In 1948, Dick and Mac McDonald opened their burger stand in San Bernardino, California. McDonalds grew rapidly and swiftly under the guidance of Ray Kroc, a milkshake-mixer salesman amazed by the success of the restaurant (James, 2009). The rapid and swift growth of the firm in its initial years was evident in the fact that it hadShow MoreRelatedMcdonalds Production and Operations Management1038 Words   |  5 PagesMcdonald’s Use of Teams in Production and Operations Management Introduction Strategies are important for all businesses, regardless of the products or services that they offer. Through strategic management and operations, companies are able to integrate new and effective means of running their respective businesses. In turn, these strategies results in an increased profit of sales, stable market position and greater levels of customer loyalty. In the fast food industry, businesses such asRead MoreOperation Management and Productivity at McDonalds1004 Words   |  4 Pagesthe effective management of operations in any given firm cannot be overstated. In basic terms, operations management can be said to be that process in which inputs are transformed into outputs in an efficient way with an aim of satisfying consumers. With that in mind, operations management as a management function can be said to be the core of any given business. In this text, I concern myself with the nature of operations management and productivity with a special emphasis on McDonalds Cor porationRead MoreMcDonalds Production and Operations Management902 Words   |  4 PagesMcDonalds Production or Operations Management: Total Quality Management (TQM) is a combination of fourteen principles that were developed by Dr. W. Edwards Deming for production and operations management. One of these major principles is the need to work in teams through breaking down barriers between staff and department areas. The use of teams in production and operations management requires workers in different areas like maintenance, leasing, and administration must work in teams to deal withRead MoreMcdonalds Operations Management Essay1145 Words   |  5 Pagesand time in the operation management department of the business. This report will focus on the business, McDonald’s and what practices they have put in place to ensure that they are producing their products efficiently and sustainably. The business will also be compared and contrasted alongside the American fast-food restaurant chain famous for its fried chicken, providing recommendations on how McDonald’s could further improve their business in the ar ea of waste and time management.  Business BackgroundRead MoreAnalysis of McDonalds Operation Management606 Words   |  2 PagesMcDonalds Operations Management: McDonalds Corporation had developed to become the leading fast-food chain of restaurants since its inception to the extent that it serves more than 47 million customers across the globe on a daily basis. The corporation is the largest global food-service retailer since it has over 30,000 local restaurants that serve approximately 52 million people in over 100 countries every day. One of the critical factors attributed to the success of McDonalds global businessRead MoreScientific Management in Mcdonalds Operation1820 Words   |  8 Pagesabout scientific management in McDonald’s operation, I believe the largest fast food McDonald’s is the most successful model on scientific management. Scientific management is a branch of classical approach; Taylor said scientific management is standardisation which means people in organization should be uniformed by company rules or policy which are some written documents. Scientific management is a very important part in management a rea, since look at the history of management. People are livingRead MoreOperations Management - Planning Control in Mcdonalds Essay2386 Words   |  10 PagesOperations Management amp; Decision Making – Planning And Control Assignment The organisation I have chosen to examine from an operations management and decision making standpoint is McDonald’s, a worldwide chain of fast food restaurants, which are run either by a franchise, an affiliate or by the corporation itself. There are over 31,000 branches of McDonald’s worldwide1. It is estimated these restaurants serve a collective 47 million customers daily2. The restaurants mainly sell customers traditionalRead MoreOperations Management: McDonalds Supply Chain737 Words   |  3 Pagesto ensure quality and increased efficiency will help to ensure costs are controlled. In some cases the company may make loans or even take equity in upstream suppliers. A good example of supply chain collaboration was seen when the firm started operations in India. There were no local suppliers growing iceberg lettuces, the company worked with some supplier to create a year round supply, aiding with seeds, equipment and relevant agricultural knowledge. The tier 2 suppliers originate the inputsRead MoreEssay about Operations Management: McDonalds Competitive Advantage3016 Words   |  13 PagesAbout McDonald’s 4 Process of McDonalds 4 Operations management 5 Operations managers 5 Operation strategy of McDonald’s 5 Pricing strategies of McDonalds 6 Innovation at McDonalds to improve operations and services 7 Inventory management 8 The Just-in-Time (JIT) Approach 9 Just- in-Time (JIT) Approach in McDonald’s 9 Advantages and benefits of JIT approach 10 Capacity management 11 Capacity strategies 11 McDonalds capacity strategy 11 Quality management 12 Quality management strategiesRead MoreOperations Management: Improving McDonalds Burger Assembly Process786 Words   |  3 Pagesand shopping task through to the management of a sports team and the stages by which academic work is managed. It is the ability to access processes with a critical and logical eye, and understand the role of processes within the larger context that creates a transferable skill put of the improvement analysis process. References Mintzberg Henry, Ahlstrand Bruce, Lampel Joseph B. (2008), Strategy Safari: The Complete Guide Through the Wilds of Strategic Management, Financial Times/ Prentice Hall